Investigation of the heat exchange of a batch reactor using dynamic simulation

A tétel rövid nézete
dc.contributor.advisorNagy, Miklós
dc.contributor.authorMijinyawa, Abubakar Sadiq
dc.contributor.departmentDE--Természettudományi és Technológiai Kar--Kémiai Intézethu_HU
dc.date.accessioned2014-11-24T08:35:53Z
dc.date.available2014-11-24T08:35:53Z
dc.date.created2014-11-20
dc.description.abstractBy comparing the experimental with simulation results and physically inspecting the reactor, improvements can be made on the temperature measuring device (thermometer) and the heat exchange device: The temperature of the reactor is measured with a thermometer with tubing in an oil bath. A temperature with the latency of the thermometer is obtained (which is off by at least five minutes for both cooling and heating). This would result in a wrong reactor temperature is reading. However a contact thermometer that would be in contact with the reactor can be used to eliminate this latency.hu_HU
dc.description.correctorgj
dc.description.courseChemical engineerhu_HU
dc.description.degreeBSc/BAhu_HU
dc.format.extent37hu_HU
dc.identifier.urihttp://hdl.handle.net/2437/201171
dc.language.isoenhu_HU
dc.subjectInvestigationhu_HU
dc.subjectheat exchangehu_HU
dc.subjectbatch reactorhu_HU
dc.subjectdynamic simulationhu_HU
dc.subject.dspaceDEENK Témalista::Kémia::Alkalmazott kémiahu_HU
dc.titleInvestigation of the heat exchange of a batch reactor using dynamic simulationhu_HU
dc.title.translatedInvestigation of the heat exchange of a batch reactor using dynamic simulationhu_HU
Fájlok
Gyűjtemények
Hallgatói dolgozatok (Természettudományi és Technológiai Kar)