<link rel="stylesheet" href="styles.f3b1fba60ec7970c.css">

Sealing Performance of Beam Tube Flange Connections Under Internal Pressure and External Bending Loads

dc.contributor.authorAslam, Usman
dc.contributor.authorKhan, Kamran Ahmed
dc.contributor.authorAhmad, Waqqas
dc.date.accessioned2026-11-12T14:49:51Z
dc.date.issued2026-05-13
dc.description.abstractPipe flange connections are critical components in nuclear and petrochemical facilities, where reliable sealing and structural integrity are essential for safe operation. In research on open-pool reactors, ion beam tubes represent a specialized application of flange-connected pressure boundaries. This study investigated the structural response and sealing performance of a beam tube–flange assembly using three-dimensional nonlinear finite element analysis. The beam tube was evaluated under two operating conditions: an empty configuration and a configuration subjected to externally applied mechanical loads. Stress analysis indicated that the maximum Von Mises stress in the beam tube remained well below the material yield strength and satisfied the design deformation limit of 3 mm for both loading scenarios. Sealing performance assessment of the flange joint showed a bolt stress variation of 23 MPa, which remained within acceptable design limits. The corresponding gasket stress variation was 0.49 MPa, with maximum and minimum gasket stresses were within the recommended operating range of 1.4–8 MPa. Time-dependent analysis revealed gasket stress relaxation of 3.5% for the empty beam tube and 3.78% for the externally loaded case. The finite element results were validated using analytical models, demonstrating good agreement with discrepancies ranging from 0.01% to 5.8%. The findings confirmed the structural adequacy and sealing reliability of the beam tube–flange assembly under the investigated operating conditions, providing a robust basis for safe design and operation in research reactor applications.en
dc.formatapplication/pdf
dc.identifier.citationInternational Journal of Engineering and Management Sciences, Vol. 11 No. 2 (2026) , 52-70
dc.identifier.doihttps://doi.org/10.21791/IJEMS.2026.08
dc.identifier.eissn2498-700X
dc.identifier.issue2
dc.identifier.jtitleInternational Journal of Engineering and Management Sciences
dc.identifier.urihttps://hdl.handle.net/2437/416857
dc.identifier.volume11
dc.languageen
dc.relationhttps://ojs.lib.unideb.hu/IJEMS/en/article/view/16937
dc.rights.accessOpen Access
dc.rights.ownerUsman Aslam, Kamran Ahmed Khan, Waqqas Ahmad
dc.subjectBolted Jointsen
dc.subjectFEAen
dc.subjectTCMen
dc.subjectSCMen
dc.subjectEPDMen
dc.subjectStress Relaxationen
dc.subjectGasket Stressen
dc.titleSealing Performance of Beam Tube Flange Connections Under Internal Pressure and External Bending Loadsen
dc.typefolyóiratcikkhu
dc.type.detailedidegen nyelvű folyóiratközlemény hazai lapbanhu

Fájlok

Eredeti köteg (ORIGINAL bundle)

Megjelenítve 1 - 1 (Összesen 1)
Betöltés ...
Bélyegkép
Név:
PDF
Méret:
1,6 MB
Formátum:
Adobe Portable Document Format